Limpets as prey: Lipophrys pholis choice for size     

Ana C. Silva  Ana C. Amador  Sónia Brazão  Claúdia Faria  Diana Boaventura 《Marine Ecology》2010,31(4):525-532

Patellid limpets are key species on rocky shores, structuring intertidal assemblages through their grazing. Their role as prey for fish is, however, often overlooked in studies of intertidal ecosystem functioning. The shanny Lipophrys pholis is a common predator of limpets on rocky shores in Northern Europe and, in this study, we examined the characteristics of its predation on limpets based on prey size. The limpet size range that adult L. pholis (10–12.5 cm) can eat was examined in the laboratory using Patella depressa in 0.2 cm classes, varying between 0.5 cm and 3.0 cm in maximum shell length. There was a limpet size refuge above 1.8 cm, while all smaller sizes were readily consumed by the shanny. The predator attacking behaviour was also examined and found to vary with prey size. Limpets up to 0.8 cm were crushed by the jaw‐constricting force and eaten whole, whereas larger prey were prised from the substratum and the body subsequently separated from the shell. To examine whether there was a L. pholis preference for P. depressa size, a two‐stage laboratory experiment was done using two size classes defined as small (0.7–0.8 cm maximum shell length) and large (1.5–1.6 cm maximum shell length). In the first stage, the predator was given each limpet size class separately. In the second stage, the fish was given a choice between the two classes. Lipophrys pholis was shown to have a preference for the large size class (1.5–1.6 cm). The average number of limpets consumed by the shanny was examined for the duration of one high‐tide typical of the central region of Portugal (≈ 4 h). On average, approximately five limpets (up to an eight limpet maximum) were consumed. The present study shows that L. pholis has a feeding preference based on limpet size, which suggests that the limpet population structure and intra‐ and inter‐specific interactions may be influenced by the shanny predation.  相似文献   

Influences of coupled wind–water processes on suspended sediment grain size: an example from tributaries of the Yellow River / Influences de processus couplés éoliens-hydriques sur la granulométrie des matières en suspension: exemple d'affluents du Fleuve Jaune     

《水文科学杂志》2013,58(5)

Abstract

Some unique coupled wind–water erosion processes exist in the desert-loess transitional zone in the middle Yellow River basin. Based on data from 40 stations on 29 rivers, a study was made on the influence of such processes on suspended sediment grain-size characteristics of the tributaries of the Yellow River. Results show that the percentage of >0.05-mm grain size decreases with the increased annual mean precipitation, but increases with the increase in the annual mean number of sand-dust storm days. The percentage of <0.01-mm grain size increases with the increase in the annual mean precipitation, but decreases with the increase in the annual number of sand-dust storm days. Based on annual mean data from 40 stations, multiple regression equations were established between the percentages of >0.05-mm grain size (r _>0.05) and <0.01-mm grain size (r _<0.01), annual mean precipitation (P _m) and annual mean number of sand-dust storm days (D _ss). On this basis, the relative contributions of the variations in D _ss and P _m to the variation in r _>0.05 and r _<0.01 were estimated. The results indicate that the variation in sand-dust storm frequency exerts greater influences on the variation in grain-size characteristics of suspended load than does the variation in annual mean precipitation. With the increase in the coupled wind–water processes index, expressed by P _m/D _ss, the percentage of >0.05-mm grain size in suspended sediment decreases and the percentage of <0.01-mm grain size increases. With the variation in P _m/D _ss, different combinations of r _>0.05 with r _<0.01 appear, which have some influence on the formation of hyperconcentrated flows. There exist some optimal ratios of coarse to fine fractions in suspended sediment that make sediment concentrations of hyperconcentrated flows the highest. The optimal r _>0.05/r _<0.01 value is related to some range of the index P _m/D _ss. When the P _m/D _ss index falls in this range, the optimum combination of relative coarse with fine sediments in the suspended load appears, and thus results in the peak values of sediment concentration.  相似文献   

Numerical analysis of frost effects in porous media. Benefits and limits of the finite element poroelasticity formulation     

Stéphane Multon  Alain Sellier  Bernard Perrin 《国际地质力学数值与分析法杂志》2012,36(4):438-458

The aim of this paper is to analyse the performance of a finite element formulation usable for predicting the mechanical consequences of frost effects on porous media. It considers the characteristics of porous media and how the frost action can be assessed. The problem is then separated into two parts: thermal and poromechanical calculations. The constitutive equations developed in the framework of poromechanics are presented and the implementation in a usual finite element poroelasticity formulation based on Zuber's method is adopted. An analysis of the time‐step influence on the convergence rate is given and leads us to propose a simple method in order to obtain objectivity of the finite element response and avoid over‐long calculations. Frost effect simulations are carried out on real porous media (two fired clays) as a case study. Although the experimental behaviour of the porous media subjected to frost action is in accordance with some observations, the calculated strains appear to be overestimated compared with measurements. The problem could be largely attributable to the difficulty of assessing permeability evolution during frost development. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Nb–Ta fractionation induced by fluid‐rock interaction in subduction‐zones: constraints from UHP eclogite‐ and vein‐hosted rutile from the Dabie orogen,Central‐Eastern China     

J. HUANG  Y. XIAO  Y. GAO  Z. HOU  W. WU 《Journal of Metamorphic Geology》2012,30(8):821-842

Niobium and Ta concentrations in ultrahigh‐pressure (UHP) eclogites and rutile from these eclogites and associated high pressure (HP) veins were used to study the behaviour of Nb–Ta during dehydration and fluid‐rock interaction. Samples were collected through a ～2 km profile at the Bixiling complex in the Dabie orogenic belt, Central‐Eastern China. All but one eclogite away from veins (EAVs) display nearly constant Nb/Ta ratios ranging from 16.1 to 19.2, with an average of 16.9 ± 0.8 (2 SE), similar to that of their gabbroic protolith from the Yangtze Block. Nb/Ta ratios of rutile from the EAVs range from 12.7 to 25.3 among different individual grains, with the average values close to those of the corresponding bulk rocks. These observations show that Nb and Ta were not significantly fractionated by prograde metamorphism up to eclogite facies when no significant fluid‐rock interaction occurs. In contrast, Nb/Ta ratios of rutile from eclogites close to veins (ECVs) are highly variable from 17.8 to 49.8, which are systematically higher (by up to 17) than those of rutile from the veins. These observations demonstrate that Nb and Ta were mobilized and fractionated during localized fluid flow and intensive fluid‐rock interaction. This is strongly supported by Nb/Ta zoning patterns in single rutile grains revealed by in situ LA‐ICP‐MS analysis. Ratios of Nb/Ta in the ECV‐hosted rutile decrease gradually from cores towards rims, whereas those in the EAV‐hosted rutile are nearly invariable. Furthermore, the vein rutile shows Nb/Ta zoning patterns that are complementary to those in rutile from their immediate hosts (ECVs), suggesting an internal origin for the vein‐forming fluids. The Nb/Ta ratios of such fluids evolved from low values at the early stage of subduction to higher values at later supercritical conditions with increased temperature and pressure. Quantitative modelling was conducted to constrain the compositional evolution of metamorphic fluids during dehydration and fluid‐rock interaction focusing on Nb–Ta distribution. The modelling results based on our proposed multistage fluid phase evolution path can essentially reproduce the natural observations reported in the present study.  相似文献   

不同预处理方法对南海东沙海域沉积物粒度的影响   总被引：1，自引：0，他引：1  

商和辉  林伟清 《海洋地质与第四纪地质》2010,(1)

通过采用不同方法对东沙沉积物样品进行了预处理,并采用综合法进行了粒度分析,以探讨东沙沉积物中碳酸盐和有机质对其粒度的影响。结果表明,去除有机质后沉积物的平均粒径和63～4μm粒径范围内的组分明显减小,有机质含量变化与平均粒径变化呈明显负相关,说明东沙沉积物中有机质的沉积是伴随细粒悬浮物质和胶体物质沉积下来的,且对细颗粒有明显的絮凝作用;去除碳酸盐后沉积物的平均粒径呈减小趋势,但粒径范围内组分含量的变化不明显,且碳酸盐含量的变化与沉积物粒径变化的关系也不甚密切。  相似文献   

基于南海北部海区浮游植物吸收光谱斜率变化的粒级结构反演   总被引：1，自引：0，他引：1       下载免费PDF全文

王桂芬  曹文熙  周雯  梁少君  杨跃忠  赵俊 《热带海洋学报》2010,29(2):25-32

浮游植物的粒级结构是一个重要的生物参数。基于南海北部海区不同水体环境下测量的生物光学数据, 作者深入研究了粒级结构对浮游植物吸收光谱的影响。结果表明, 选择443和510nm波段计算得到的浮游植物光谱斜率S对粒级结构的变化具有较高的敏感性, 其随着小型浮游植物比例的增大呈不断增加的趋势。S与水体叶绿素a浓度、浮游植物吸收系数(aph(443))之间表现出明显的正相关特征。以40%为界对不同粒级浮游植物的优势进行定义, 发现在S与叶绿素a浓度、aph(443)的关系分布中小型(Micro)和微微型(Pico)浮游植物占据优势的水体表现出较为明显的分界, 叶绿素a浓度和aph(443)分别在0.70mg•m-3和0.05m-1附近, 相应的S在0.0004(m•nm)-1左右。基于实测数据建立的遥感反射率蓝绿波段比值与S之间的统计关系, 决定系数高达0.91, 为从水色遥感数据反演浮游植物粒级结构提供了重要手段。  相似文献   

Influence of pore size and geometry on peat unsaturated hydraulic conductivity computed from 3D computed tomography image analysis     

F. Rezanezhad  W. L. Quinton  J. S. Price  T. R. Elliot  D. Elrick  K. R. Shook 《水文研究》2010,24(21):2983-2994

In organic soils, hydraulic conductivity is related to the degree of decomposition and soil compression, which reduce the effective pore diameter and consequently restrict water flow. This study investigates how the size distribution and geometry of air‐filled pores control the unsaturated hydraulic conductivity of peat soils using high‐resolution (45 µm) three‐dimensional (3D) X‐ray computed tomography (CT) and digital image processing of four peat sub‐samples from varying depths under a constant soil water pressure head. Pore structure and configuration in peat were found to be irregular, with volume and cross‐sectional area showing fractal behaviour that suggests pores having smaller values of the fractal dimension in deeper, more decomposed peat, have higher tortuosity and lower connectivity, which influences hydraulic conductivity. The image analysis showed that the large reduction of unsaturated hydraulic conductivity with depth is essentially controlled by air‐filled pore hydraulic radius, tortuosity, air‐filled pore density and the fractal dimension due to degree of decomposition and compression of the organic matter. The comparisons between unsaturated hydraulic conductivity computed from the air‐filled pore size and geometric distribution showed satisfactory agreement with direct measurements using the permeameter method. This understanding is important in characterizing peat properties and its heterogeneity for monitoring the progress of complex flow processes at the field scale in peatlands. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

有限尺度李雅普诺夫指数与海表温度梯度相关性的初步分析     

曹蕾  张杰  杨俊钢  周超杰  孙伟富  崔伟 《海洋科学进展》2020,38(1):130-139

为了探究海表温度和海面高度之间的瞬时相关性,介绍了一种卫星测高数据的拉格朗日分析指数--有限尺度李雅普诺夫指数(Finite Size Lyapunov Exponent,FSLE),以黑潮延伸体区域的涡旋和南大西洋的亚南极锋为例,通过对观测、模式结果和融合产品结果的分析,探讨了该指数与海表温度梯度(Sea Surface Temperature Gradient,SSTG)之间的相关性。比较FSLE图像和SSTG图像发现,FSLE与SSTG均呈丝状结构,对海洋表层水体结构描述具有一致性,尤其在温度梯度大和地转流强的区域更为一致。二者的一致性要远好于其他常用方式,比如全流速、OW参数涡旋识别方法和Winding-Angle涡旋识别方法。不同区域FSLE与SSTG之间的相关性表现不同,黑潮延伸体区域相关系数存在显著的季节变化,而南大西洋亚南极锋区域季节内变化突出。  相似文献   

Patterns of mixed siliciclastic‐carbonate sedimentation adjacent to a large dry‐tropics river on the central Great Barrier Reef shelf,Australia     

《Australian Journal of Earth Sciences》2013,60(5):665-683

The Great Barrier Reef represents the largest modern example of a mixed siliciclastic‐carbonate system. The Burdekin River is the largest source of terrigenous sediment to the lagoon and is therefore an ideal location to investigate regional patterns of mixed sedimentation. Sediments become coarser grained and more poorly sorted away from the protection of eastern headlands, with mud accumulation focused in localised ‘hot spots‘ in the eastern portion of embayments protected from southeast trade winds. The middle shelf has a variable facies distribution but is dominated by coarse carbonate sand. North of Bowling Green Bay, modern coarse carbonate sand and relict quartzose sand occur. Shore‐normal compositional changes show Ca‐enrichment and Al‐dilution seawards towards the reef, and shore‐parallel trends show Al‐dilution westwards (across bays) along a Ca‐depleted mixing line. Intermediate siliciclastic‐carbonate sediment compositions occur on the middle shelf due to the abundance of relict terrigenous sand, a pattern that is less developed on the narrow northern Great Barrier Reef shelf. Rates of sediment deposition from seismic evidence and radiochemical tracers suggest that despite the magnitude of riverine input, 80–90% of the Burdekin‐derived sediment is effectively captured in Bowling Green Bay. Over millennial time‐scales, stratigraphic controls suggest that sediment is being preferentially accreted back to the coast.  相似文献   

Observations and analyses of floc size and floc settling velocity in coastal salt marsh of Luoyuan Bay, Fujian Province, China   总被引：1，自引：0，他引：1  

WANG Aijun  YE Xiang  CHEN Jian 《海洋学报(英文版)》2010,29(3):116-126

In coastal environments, fine-grain sediments often aggregate into large and porous flocs. ElectroMagnetic Current Meters (EMCM) and Laser In Situ Scattering and Transmissometry (LISST-ST) have been deployed within a Spartina alterniflora marsh of the Luoyuan Bay in Fujian Province, China, to measure the current velocity, the floc size and the settling velocity between 15 and 22 January 2008. During the observations, the near-bed water was collected in order to obtain the suspended sediment concentration (SSC) and constituent grain size. Data show that: (1) the nearbed current velocities vary from 0.1 to 5.6 cm/s in the central Spartina alterniflora marsh and 0.1–12.5 cm/s at the edge; (2) the SSCs vary from 47 to 188 mg/dm 3 . The mean grain size of constituent grains varies from 7.0 to 9.6 μm, and the mean floc sizes (MFS) vary from 30.4 to 69.4 μm. The relationship between the mean floc size and settling velocity can be described as: w s =ad b , in which w s is the floc settling velocity (mm/s), a and b are coefficients. The floc settling velocity varies from 0.17 to 0.32 mm/s, with a mean value of 0.26 mm/s, and the floc settling velocity during the flood tide is higher than that during the ebb tide. The current velocity and the SSC are the main factors controlling the flocculation processes and the floc settling velocity.  相似文献